ecoast
Elite Member
v3i
What's your favorite White's detector
- Thread starter james45
- Start date
hoser
Forum Supporter
Not sure. The Pro probably has more bells buzzers and whistles. Usually a different coil type as well.
CalReg
Forum Supporter
Never owned a White's detector, but back in the 70's I lusted after the Coinmaster series!
ArizFlash
Junior Member
My favorite Whites detector is the MXT Pro followed by the TRX pinpointer then the V3i, XLT, and IDX with the ground balance mod.
GreenMeanie
Elite Member
- Joined
- Jun 6, 2006
- Messages
- 523
I am going to say the V3I.
That being said most peoples problems with it was their own doing.
That being said most peoples problems with it was their own doing.
too_pointer
Elite Member
I never had one, or probably will, but enjoy post from owners, most sure seem positive,
too_
too_
Coin-Saver
Elite Member
The thing I could never understand was I found more silver with the MXT and more Gold with the V3i. I sure would have thought it would be the other way around. I'm not complaining though. But I agree, That the V3i was a special machine that I never fully got the hang of.
hanoverdigger
Elite Member
My favorite was the Eagle 2 SL. Some of my best finds were with this detector. CS tongue, 1776 2 Reale are just a few. Had the DFX, Blue and Gray, MXT. The MXT proved to be the next best of these three. My brother still uses the MXT.
bluebird66
Senior Member
That's easy, my MXT has never let me down.
Dflan83
Elite Member
I never owned a v3i but a guy I used to hunt with had one and that screen was wonderful. Even though I had an Etrac at the time I always wondered how well the v3i did the mf thing.
wolf-n-wa
Forum Supporter
Loved my DFX until it went to overload mode. Hung it up after trying a few things and went with a NOX 800. The DFX was killer at the beaches here in Puget sound.
FalconBob
New Member
When I hit newer parks and tot lots for clad and jewelry I will use my Treasure Pro. Easy to use, light weight, 2 batteries and it does just fine. For going in the woods and older properties I'll use my MX7 with the 6-1/2" Detech coil. Machine is heavy so I can't swing it for a long period of time unfortunately.
When I got my first MT I was going to get the DFX and the guy at the whites store said not to. I was surprised and said I was ok with the price and wanted a good machine. He said that it would be better to buy a new M6 instead as I was new at detecting and it might be to much for me to learn. And I could always come back and upgrade. I think he did me a favor. I really liked the M6 and still have it at home. Found tons of great stuff with it. So he was right about that and got a customer for the rest of the time whites was around.
My 6000 di pro sl with tone mod makes a great detector even betterJust wondering what it would be like finding white's detectors?Anyone have a favorite Whites detector from all of them? When are the Garrett folks coming out with a remake whites detector?
Adams449
Forum Supporter
I found more small rings with my XLT than any of my other detectors. I have and use my V3i when I need to really eliminate a lot of different targets. The V3i is much heavier than my DEUS II, but the aftermarket battery holder and 18650 batteries helps out with reducing the weight and keeping me swinging it.
Martin_V3i
Elite Member
"the aftermarket battery holder and 18650 batteries"
That is how my V3i has been set up like for a long time.
Adams449
Forum Supporter
The V3i was/is the best detector ever built. I will use mine until I can't swing a detector at all. Garrett would be smart if they kept the circuits updated and brought out a revised, smaller and more powerful CPU model of it.
