coil

Brand new - was 1500.00 if interested make offer. Thanks

Hello Everyone - (totally new to the hobby) I purchased a Ricomax GC-1028 without a coil cheap. Are coils specific to a unit, or can I purchase a replacement one with the same attachment to connect to the computer? Thanks!

I have i just started metal detecting and bought a minelab x terra 705 with a 7.5 khz.. I think the coil faulty because when i touch it on the ground i beeps.i have turned the sensitivey to about 20 Is this ok thanks Terry

Hello, I have a couple questions in regards to my Ace 200. 1st if I upgrade to a better coil would that benefit me any? (Currently have 6.5" x 9" concentric PROformance) 2nd is would it be worth changing out the coil on the machine or worth upgraded to a different machine? Thank you for...

I live on a civil war site in Fairfax, Va. My soil is dense clay and I’m lucky to get 8” with the stock AT Pro coil. Should I get a new coil for my AT Pro or will something like the equinox 600 be better? (If new coil then which one?) Thanks

most people agree that the Equinox 15 x 12 coil is too hard to swing in the water. I wonder why coils could not be designed like a leading edge of a air craft wing, or a slim wedge like on both outer left and right edges to make the coil easier to swing under water. Does this even make sense?

Hello All, So I've recently acquired a used Fisher CZ-7A. What coil options are out there for this specific model? Can I go with any Fisher coils which have the same connector? :?: Thank you and happy hunting!

Would be very interested in seeing a 5x8" coil for the Equinox. Most of my targets are in the 4-6" range with average to above average amount of junk. On my AT Pro the 5x8" coil was my go to coil. I wonder why no one is making this coil for the Equinox.

Hi to all, a Coil is a TX anx RX antenna used by the circuits of a metal detector So need to know if a CTX 3030 Coil for example a 6" Coil could be used to an Equinox metal detector, ok frequencies are not all the same maybe. How about the connector of the two metal detectors? Thanks for an...

I like to get out in the open fields and dig the easy obvious signals just as much as the next guy, but I also enjoy the challenge of sifting through thick iron & trash trying to pick out every last detectable good target. From what I've seen the 6" coil on the Equinox is perfect for this task...

I have been considering getting a smaller coil for my Delta 4000. Teknetics sells one. So does CORS (formerly NEL) I think there may be another few out there. Does anyone out there have any experience with an aftermarket coil for the Teknetics Greek Series (Alpha, Delta, Gamma) machines...

Hellow to everybody I just register now but i have been reading for a while. I was living to Guadalajara, Jalisco,Mexico land of Tequila, i just move here 15 days ago. i am between playa del carmen and Cancun in Riviera Maya. At Guadalajara i used to dig in parks with my fisher...

I heard today that NEL is going to put out a coil for the sovereign and the Excalibur. They should be out by the end of the month.

I just got my 10x12 sef coil from kellyco. I'm using it on my etrac. And I have to say I'm pretty upset. If its not any worse than my stock pro coil, its exactly the same. Bot have about a 5in air test. I tried it for 4 hour s straight in an area I know to have deep good targets. I was thinking...