MS-2 Garrett AT PRO

[Blue Angle]

Hi .
Hi everyone I'm trying to fix my ms2 headphones the 2 pin type. On the volume side 4 wires came loose and I'm trying to get them fixed ,there are no diagrams ,pictures out there nobody knows anything about them . After a stroke a few years ago I became slightly deaf so I need my headset badly . So if there is anybody out there with a set who is willing to take there's apart just to take a picture of them or has a picture or diagram please please post them on here many

 

[zimbrich]

I have the same issue. I am attaching a photo before I head down to solder the leads back on. I am taking a guess and going to connect the Black to the Blue thin wire point, Red to the Red thin wire point and White to the White thin wire point. I will post again if this works, with another picture.

 

[zimbrich]

Ok, that did the trick! I also put two (2) wire ties in opposite directions on the cable leading in from the outside, in hopes that will keep the cable from spinning and breaking the solder joints again. These belong to my son and he is notoriously hard on headphones!

Hope this helps someone else!