I do a lot of electrolysis and I found using a bench voltage generator is a much easier solution than tracking down a battery charger. It also gives you the option to really control the electricity. I run very slow and low on small or fragile items, higher amps on big stuff.
One like this, just figure out what size you want
Limited-time deal: Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads https://a.co/d/3y0iIYM
What is the voltage you normally use? The battery chargers are always 6v. or 12v. I realize that the amps can be adjusted for the size of the item but I am not quite sure what to set the voltage at.. Thanks in advance
Without going super techie, my voltage usually falls between 6v and 12v. I focus on the amps since that is what is really driving the process. "fast" for me is running about 6 amps, slow is maybe 2-3amps. When you use the machine like i posted your voltage will vary as you adjust the amps and the resistance provided by the item and water.
I do a lot of electrolysis and I found using a bench voltage generator is a much easier solution than tracking down a battery charger. It also gives you the option to really control the electricity. I run very slow and low on small or fragile items, higher amps on big stuff.
One like this, just figure out what size you want
Limited-time deal: Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads https://a.co/d/3y0iIYM
What is your choice material for anodes?
I do a lot of electrolysis and I found using a bench voltage generator is a much easier solution than tracking down a battery charger. It also gives you the option to really control the electricity. I run very slow and low on small or fragile items, higher amps on big stuff.
One like this, just figure out what size you want
Limited-time deal: Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads https://a.co/d/3y0iIYM