ecoast
Elite Member
Approx $30 +/-
you need:
standard WSA2 puck
over the ear h/f's w/ 1/8" input
Deus2 h/f adapter
1/2" #2 gun screws (4)
small drill bit
epoxy
I used (no affiliation):
cheap BT h/f's w/jack input
Deus2 puck adapter plate
1. carefully epoxy screws into adapter plate (wait til dry) NOTE: Pic 3 top right, one screw VERY close to puck-use CAUTION
2. put black marker on screws to mark template
3. tape template to h/f's & drill headphones
4. mount screws to drilled holes with epoxy
5. connect 1/8" cord (included w/h/f's) when epoxy is dry
BONUS: still can use BT headphones when not detecting!!!
enjoy!
you need:
standard WSA2 puck
over the ear h/f's w/ 1/8" input
Deus2 h/f adapter
1/2" #2 gun screws (4)
small drill bit
epoxy
I used (no affiliation):
cheap BT h/f's w/jack input
Deus2 puck adapter plate
1. carefully epoxy screws into adapter plate (wait til dry) NOTE: Pic 3 top right, one screw VERY close to puck-use CAUTION
2. put black marker on screws to mark template
3. tape template to h/f's & drill headphones
4. mount screws to drilled holes with epoxy
5. connect 1/8" cord (included w/h/f's) when epoxy is dry
BONUS: still can use BT headphones when not detecting!!!
enjoy!
Attachments
Last edited:
