Brainworm
Elite Member
Hope the bad weather clears, I'm sure your biting at the bit to get out swinging, keep use posted and best of luck.
TnIndian you must like the ATP..I see you got the Fisher for sale ?
--------------------------------------------------------------------------------
Good luck with your new machine. also like the cards
Have you joined the AT Pro group in the 'social group' under community links.
Some good info there for sure. Your gonna get a an addiction to the Pro. Build your own scoop. Do you know how to weld or have a buddy that can weld? If so its easy to do. I have been using my Pro in the water for two years and I still use the stock headset. Just don't fall down or get to deep. When I get to my neck that's way deep enough anyway. Congrats on the Pro!
Hope the bad weather clears, I'm sure your biting at the bit to get out swinging, keep use posted and best of luck.
Thought the AT pro was for the homeowner to use
TN_INDIAN 1-12-14 Minelab thank me later. Theres no more growing with Garret after the At Pro....And u will want to grow trust me.
Hope the bad weather clears, I'm sure your biting at the bit to get out swinging, keep use posted and best of luck.
Best of luck with your AT Pro. Did your F75SE sell yet?
Good luck with it.
Have you had it out on a hunt yet?
Curious your findings vs the F75 @ your pounded sites.
http://metaldetectingforum.com/showthread.php?p=1961327#post1961327
Check out this post I added for another user. Some starter VDI numbers and some helpful info for ya.
If you get good numbers above 60's I say dig it..If the numbers dont jump more than a few its a good signal..solid 53 is a nickel 75-77-81 penny.82 83 dime
92 usually quarter..numbers may vary for you..If you have the 5x8 coil you can comb the yard fast.if using bigger coil move a little slower.With the bigger coil you kind of have to lock on the target more..Post up your finds with the atp
is a good day to get out and hit some sites..HH
Have you joined the AT Pro group in the 'social group' under community links.
Some good info there for sure. Your gonna get a an addiction to the Pro. Build your own scoop. Do you know how to weld or have a buddy that can weld? If so its easy to do. I have been using my Pro in the water for two years and I still use the stock headset. Just don't fall down or get to deep. When I get to my neck that's way deep enough anyway. Congrats on the Pro!
Yea I been using it a month or so...I had to get used to it..I had the Ace250 then got the F2 and went to the ATP..I was off work for a couple weeks and i used it everyday I could...I have found if you are getting coins shallow turn the sens down..I only run wide open in fields and places I have been over with other detectors.How did you like the air tests on the ATP verses ur F75? Were they about the same?
Best of luck with your AT Pro. Did your F75SE sell yet?
yea traded it for a minelab exp 2