MTtrashdigger
Elite Member
If your getting falsing on rusty screws/nails (24-26), try a factory reset - reflash the software - factory reset.
I do get falsing in the mid 20s range, especially on deep rusty bits of wire and small rusty screws and bolts. I usually run 21-22 sensitivity, 5-6 recovery speed in Park 1 5 tones. Iron bias set at 1 or 2. I know how to do the factory reset and I will try that. But "reflash the software" is not a term I am familiar with. Explain a little? Sorry for my ignorance.