I IDXMonster Elite Member Joined Jul 30, 2013 Messages 5,724 Location New Glarus May 18, 2021 #1 I have a Sunray X-8 that has a bad spot about 2” from the connector that goes to the machine. This is an FBS model. Anyone fixing them? Thanks!
I have a Sunray X-8 that has a bad spot about 2” from the connector that goes to the machine. This is an FBS model. Anyone fixing them? Thanks!
Rudy Admin Joined Jan 10, 2006 Messages 27,650 Location Beaumont, CA May 19, 2021 #2 Moved this post from the classified section to this forum.
Martin_V3i Elite Member Joined Oct 27, 2010 Messages 5,138 Location North DFW, TX May 19, 2021 #3 Rudy said: Moved this post from the classified section to this forum. Click to expand... Is there a link to the post in classifieds?
Rudy said: Moved this post from the classified section to this forum. Click to expand... Is there a link to the post in classifieds?
Rudy Admin Joined Jan 10, 2006 Messages 27,650 Location Beaumont, CA May 20, 2021 #4 Martin_V3i said: Is there a link to the post in classifieds? Click to expand... Not after today, I moved the post here and left a 1 day redirect back where it came from.
Martin_V3i said: Is there a link to the post in classifieds? Click to expand... Not after today, I moved the post here and left a 1 day redirect back where it came from.
hoser Forum Supporter Joined Jan 10, 2006 Messages 8,097 Location Grayling, MI. May 20, 2021 #5 If you do a simple splice, I would do an offset pattern, solder joints with small heat shrink. It won't be pretty, but it will work well for you.
If you do a simple splice, I would do an offset pattern, solder joints with small heat shrink. It won't be pretty, but it will work well for you.