Surf master potentiometer

mad_river

Full Member
Joined
Apr 8, 2012
Messages
124
Location
urbana , ohio
Can’t seem to find a replacement or one that will work. Does anybody have a source for the 10k and 100k pots? This is for the surf master pulse. Just has the two dials. Thanks in advance

Eric


Sent from my iPhone using Tapatalk Pro
 
856f76bab4d1db6b8b4a176c4f0d4f23.jpg
856f76bab4d1db6b8b4a176c4f0d4f23.jpg
79d342005a61c7ea6888b9987222e41a.jpg
afb83c0ff3af6553e074191687aee48c.jpg
9706445360247a32fd67f9bced9ae728.jpg



Sent from my iPhone using Tapatalk Pro
 
Only thing I can get off of them. I’ve searched but to no avail.


Sent from my iPhone using Tapatalk Pro

If it was me, I would start here:

https://www.jameco.com/shop/keyword=100k-potentiometer-switch

And here:

https://www.jameco.com/shop/StoreCa...eText=10K potentiometer&search_type=jamecoall

IMHO you are unlikely to find an exact match for the Whites, however, any 100K pot with on/off should replace the existing disc/on/off control, provided the shaft will fit through the control box adequately. Same thing for the 10K threshold pot. I also found a schematic in case you need one:

https://www.hobby-hour.com/electronics/s/surfmaster-pi-metal-detector.php

I have used a lot of Jameco parts and have never had an issue with any of them. I hope this helps you get the Whites up and running again.
 
Back
Top Bottom