threshold

Hi, new to the forum. Is there a metaldetector model that allows to set a threshold on the depth of the incoming signal and filter out the strongest (nearest) one? I'd like to be able to only hear deepest targets (obviously without ID) without being annoyed with the shallowest.

This has probably been posted before or variations. But it is worth repeating. On your Equinox increase your threshold so you can hear it. It will tell you the amount of iron and other ferrous or non-ferrous targets under your coil. For instance I was hunting a trail along the river recently...

on the Equinox 800 does anyone use a threshold pitch in park or field to help id targets or rejected targets? As for me, I don't have a clue if this is any benefit or not. I know in gold it defaults to a threshold pitch and volume.

Hi to all diggers I need to repair my Excalibur the schematic diagram. My Excalibur is 1000 with 8" Coil, but if you have the new Excalibur It could be ok maybe. Is there anyone who has it? to share me please Problem of my Excalibur could be: 1. Coil (but my coil is like new) always I washed...

I hunt in the park and field modes 90% of the time and the rest beach at a large inland lake. I don't hunt for gold nuggets. I have never adjusted the threshold setting. Amy I missing something here that I should know about changing the threshhold setting in park and field modes?

I recently viewed a post of someone who found a ring using the F5 at a park. He said he ran his gain between 30-50. Why run the gain 30-50? I always thought you would run it as high as you could without too much chatter. Doesn't gain directly relate to depth? I use the F5. I started in April and...