zeemang
Forum Supporter
I will certainly battle test anything you want tested. One thing to keep in mind is the UV index can hit 11 here in the summer months and that absolutely kills plastics. Overall a very tough climate for anything...
We held off releasing the products until we had them refined, built and ready to ship.
The PH 7.0 PowerHandle is $175 and am selling at a discount of 20% at the moment.
Why the discount? It is simple, the products are amazing and I want to get 10 or 20 units out to customers. Once they see and use them it is all over and I will bring the price back to $175 (which is needed to make a profit).
But, for now I am offering to the first 5 buyers for each item from the Friendly Forum the following deal:
PH 7.0 PowerHandle for the Excalibur: $125 with free shipping
NOX-1 Stork Leg kit for the Equinox $85 with free shipping
X-750 Stork Leg for existing handles that take a 3/4" lower shaft: $75 with free shipping
Free shipping to continental USA only.
Again I am not discounting due to inferior products that I am dumping!! I know what will happen when serious hunters see and use these products.
More details at my website. Click the PowerHandle banner upper right at the forum.
Chuck
do I need to modify anything to use my handle that has the pinpoint toggle switch
I could be wrong but I think his shaft is smaller, so I am thinking you will need to do his handle. Once I get one I will post pictures. On what is needed to keep the Excalibur better then the Nox and Deus ll.
Aren't these "stork legs" mainly for water hunters ? I don't think the weight difference out of the water will make much of a difference.
Hi, if it concerns scoops and carbon/metal shafts, then I can also participate in the review (not the fact that I will give all the information publicly, but still ...)I am ready, 2022 is the New page. In fact I was going to purchase one after Christmas, so I'll contact you on that.
Before you posted the Excalibur setup, I had no problems when swinging in the water, you posted.. and now my arm is telling me.. ..get it.
Un answered , I have a 3rd. the lower rod set up , I am guessing will not work on plugger solid strait shafts as stated - which have a 3 hole head adjustment just to mention , the lower part of the carbon fiber Plugger- if you were to insert your lower rod the medal part- set up & lock it down even on the last hole it -is not nearly long enough to extend to the end were the lower rod- comes out of the plugger rod , due to your thinner shaft coming out of a larger hole with no support will cause a wobble & stress- it seems that your set up only is made for STOCK shaft set ups , not for custom strait shafts- which most have moved on to , hope in the future you make a behind the cuff set up for the Excalibur's , I do like the CUFF , as if you hunt in the water with the Equinox- you would want metal , but due to leak issues , most don't,- they use the Excalibur , also with the head in the back while water hunting with the Excalibur - in my opinion is better , in most cases your machine is not under water, and is out of the salt water . Good luck with your sales , you should do good with beginner's buying Equinox with the stock shaft , and Excalibur under the cuff user's , however you are leaving a large percentage of both Equinox & Excalibur user's behind , making additional product's , and addressing user's concern's is a positive thing , Merry Christmas Chuck From the lock pin on the medal to the end , how many inches is it on your shaft lock down , not the entire lenth , just from the pin to the end heading towards the coil PS Stavr if thing;s are getting to hot over thier , move to the US , everyone else is , we will welcome you here !
Basically it's just a extention piece that snaps in place , Mine were custom made by plugger , I found it to be better than the under the cuff , not only balanced better , head out of the salt , but less pull on the head phones ,not stretched as much , behind the elbow with a knob guard is in my opinion , my ticket , however no response from Chuck leads me to believe , newbie focus is his out look , first time Excal / Equinox buyers , I can only give him ideas to make everyone happy , not going to post on his thread here again , wish him the best with his. Sales & happy holidays Chuck.
X2!I like mine behind the cuff also. If that was adjustable would be a plus.